The AT T-1 Antenna Tuner is designed for 125 W HF operation in mobile environments where short whip antennas are used. A combination of clever software algorithms and an ability to tune from memory ensures that tuning is fast and efficient. The AT T-1 can be used with the 2110M,2110T HF Manpack and NGT MR Transceivers and will support ALE and Frequency Hopping modes of communication as well as receiver scanning and data transmissions.
The Tuner is contained in a rugged metal case that is waterproof and complies to MIL-STD-810F for vibration and dust ingress. Additionally, the unit is protected from antenna mismatch, and open or short circuit antenna conditions.
The AT T-1 Antenna Tuner is supplied with standard length coaxial and control cables, and optional 2-section vehicle whip antenna and NATO standard antenna mount hardware.
SPECIFICATIONS
Frequency range
2 to 30 MHz
Power rating
10 to 125 W PEP
Input impedance
50 O
VSWR
Typically <1.5:1
Tuning Speed
Typically <2 seconds
Tune from memory is <160 mS
Antenna length
2 m (3 to 30 MHz)
6 m (2 to 30 MHz)
Protection
Open circuit antenna
Short circuit antenna
Over temperature
High VSWR
Supply current requirements
Scanning: 100mA
Tuned: Typically 200 mA
Maximum 800 mA
Supply voltage
10 to 16 V DC
Temperature
- 30 to +60°C
Environmental
MIL-STD-810:
Waterproof to 1 m for 1 hr (IP68)
Vibration
Dust
Dimensions
200 mm W x 320 mm D x 170 mm H
Weight
3.6 kg
Connectors
RF: UHF socket
Control: 6 pin bayonet (as per 9350)
Case construction
Diecast aluminium alloy
Compatibilities
2110M,T Manpack (with 3160 125 W Power Amplifier), NGT MR Transceiver
Antenna Details
3 m, 2 piece whip antenna with flexible base
Accessories
NATO standard 4 hole pattern antenna base
6 m Control cable (compatible with 9350)
6 m Coaxial cable
.jpg)
PRODUCT SUMMARY